Kodak I1220 - Document Scanner, Руководство по установке и настройке

Страница: 14 / 14

Kodak i1220 Scanner Installation and Configuration Guide Version: 4/3/2012
Page | 14
LOCK THE SCANNER CONFIGURATION TO ‘SCEIS DEFAULT’
The following steps lock the ‘SCEIS Default’ settings when scanning in OnBase and also allow you to use the scanner for
other applications on your workstation. You should perform the steps below even if you do not use other scanning
applications. This will prevent the SCEIS Default configuration from being changed in the background by software that
you use that may connect to the twain drivers even when you do not scan.
1)
Be sure that the Configuration instructions (pages 3 – 13) have been completed to create a ‘SCEIS Default’ profile
and move it to the top of the Settings Shortcuts list (page 13).
2) Go to the following directory on your workstation.
a. Windows XP and earlier
C:\Documents and Settings\All Users\Application Data\kds_kodak\kds_i1200\twain
b. Vista and later
C:\Users\All Users\kds_kodak\kds_i1200\twain
If these directories are not visible to you when you to try to browse to them it means they are hidden. Type them
into the address field of My Computer or Desktop Explorer.
3) Open the file ‘setup001.ini’ with Notepad and be sure there is a line that says ‘Current_1220 = SCEIS Default’.
Close the file without making any changes.
4) Make the file ‘setup001.ini’ a Read Only file as follows. Right click on the file…Properties…Read Only…Apply…OK
5) From that directory double-click on the subdirectory called ‘profiles’ then the subdirectory ‘i1220’. You should now
be in the directory:
a. Windows XP and earlier
C:\Documents and Settings\All Users\Application Data\kds_kodak\kds_i1200\twain\profiles\i1220
b. Vista and later
C:\Users\All Users\kds_kodak\kds_i1200\twain\profiles\i1220
6) Double-click to open the file ‘profileorder.xml’ and see the first line that looks as follows.
<id>#################</id>, where ################# is a 17 digit number.
Write down the number.
Close the file.
7) In the same directory find two files that have that number. One will be an ‘.xml’ file and one will be a ‘.profile’ file.
Make both files Read Only files as follows: Right click on the file…Properties…Read Only…Apply...OK
8) Close all of the windows and files if any are still open. Your scanner is now configured for SCEIS (e.g. black and white,
ignore blank pages, detect paper size, etc). You should also be able to use the Kodak scanner with other scanning
software that your agency uses, without affecting the SCEIS settings.