52
www.kodak.com/go/support
Troubleshooting
Picture quality problems
Computer does not
communicate with
the camera
■
Make sure the battery is charged and installed correctly (see
page 1
).
■
Make sure the USB cable model U-8 is connected to the camera
and the computer (see
page 43
). (If using an EasyShare dock,
check all cable connections. Make sure the camera is seated on
the dock.)
■
Turn on the camera.
■
Make sure EasyShare software is installed (see
page 42
).
Status
Solution
Picture is not clear
■
To automatically set exposure and focus, press the Shutter button
halfway
. When the framing marks turn green, press the Shutter
button
completely down
to take the picture.
■
Clean the lens (see
page 59
).
■
Make sure the camera is not in Macro mode if you are more than
27.6 in. (70 cm) from your subject.
■
Place the camera on a flat, steady surface or use a tripod (especially
in high-zoom settings or in low light).
Picture is too dark
■
Reposition the camera for more available light.
■
Use Fill flash (see
page 12
) or change your position so light is not
behind the subject.
■
Move so that the distance between you and the subject is within the
effective flash range. (See camera specifications starting on
page 56
.)
■
To automatically set exposure and focus, press the Shutter button
halfway
. When the framing marks turn green, press the Shutter
button
completely down
to take the picture.
Status
Solution
