Troubleshooting
www.kodak.com/go/support
57
Flash does not fire
■
Check the flash setting, and change as needed (
see page 12
).
NOTE: The flash does not fire in all modes.
Memory card is almost
or entirely full
■
Transfer the pictures to the computer (
see page 53
).
■
Delete pictures from the card (
see page 30
) or insert a new card.
The Reset Camera
feature did not take
effect.
■
After using the Reset Camera feature (
see page 51
), turn the
camera off and then on again.
Battery life is short
■
Make sure the correct battery type is installed (
see page 65
).
■
Charge the batteries (
see page 1
). Watch the battery level (
see
page 9
).
■
Use a power-saving LCD Brightness setting (
see page 51
).
Shutter button does
not work.
■
Turn on the camera (
see page 3
).
■
Transfer pictures to the computer (
see page 53
), delete pictures
from the camera (
see page 30
), or insert a card with available
memory (
see page 4
).
Memory card not
recognized or camera
freezes with card
■
Card may be corrupted. Format the card in the camera (
see
page 52
).
Caution: Formatting a card deletes all pictures and
videos, including protected files.
■
Use another memory card. Only SD or SDHC Cards are supported.
Pictures on card (or in
internal memory) are
corrupted
■
Retake pictures.
■
Do not remove card while the camera is on.
■
Keep rechargeable batteries charged.
■
Transfer pictures to the computer (
see page 53
), then format the
card or internal memory (
see page 52
).
Caution: Formatting a card deletes all pictures and
videos, including protected files.
Status
Solution
