76
Chapter 9
Installing the Custom Camera Insert
A
universal insert
is pre-installed in the camera dock. It allows all Kodak
EasyShare CX/DX6000 series and LS600 series cameras to use the camera
dock.
A
custom insert
is included with your camera. It provides a perfect fit for
your Kodak EasyShare DX6340 zoom digital camera.
Remove the Universal Insert
1
Place your thumbs against the front of the
universal insert. Press in and lift.
2
Lift the side edge of the insert, then remove
the insert from the dock.
3
Save the universal insert as a spare.
Install the Custom Insert
1
Position the custom insert so the cutout
lines up with the camera dock connector.
2
Fit the insert into the groove in the dock.
Snap it into place.
NOTE: To order a custom insert for your camera, visit
www.kodak.com/go/dx6440accessories.
Cutout
Connector