42
Chapter 7
3
Place the camera in the Dock, and push
down to seat the connectors. The Dock
locator pin fits into the camera tripod
socket.
The Dock light glows green when the
connectors are properly seated.
The
camera is now powered by the Dock.
NOTE: If the Battery Pack requires charging, the Dock light turns red and
charging begins.
Charging the Battery Pack
The Battery Pack must be charged prior to use.
1
Turn the camera off.
2
Make sure the Battery Pack is installed in the camera.
3
Dock the camera in the EASYSHARE Camera Dock (see
page 41
).
m
Charging begins after a few seconds.
m
The Dock light glows red while charging, then glows green when the
Battery Pack is fully charged.
m
Full charging takes about 2.5 hours. After the Battery Pack is fully
charged, leave the camera in the Dock. It continually senses battery
power and resumes charging when necessary. Under these
conditions, there is no red light while charging.
m
Charging stops if you turn the camera on.
NOTE: The EASYSHARE Camera Dock only charges the provided Ni-MH
Rechargeable Battery Pack. If you place the camera in the Dock with
any other type of batteries, rechargeable or not, no charging takes
place.