Troubleshooting
www.kodak.com/go/support
47
Picture quality problems
If...
Try one or more of the following
Picture is too dark
or underexposed
■
Reposition camera for more available light.
■
Use Fill flash (
page 27
) or change your position so light is not behind
the subject.
■
Move so that the distance between you and the subject is within the
effective flash range (
page 9
).
■
To automatically set exposure and focus, press the Shutter button
halfway
. When the Ready light glows green, press the Shutter
button
completely down
to take the picture.
■
Adjust the exposure compensation (
page 30
).
Picture is too light
■
Reposition camera to reduce the amount of available light.
■
Turn flash off (
page 27
).
■
Move so that the distance between you and the subject is within the
effective flash range (
page 9
).
■
To automatically set exposure and focus, press the Shutter button
halfway
. When the Ready light glows green, press the Shutter
button
completely down
to take the picture.
■
Use Auto, Landscape, or Close-up to adjust the exposure
compensation.
Picture is not clear
■
To automatically set exposure and focus, press the Shutter button
halfway
. When the Ready light glows green, press the Shutter
button
completely down
to take the picture.
■
Clean the lens (
page 60
).
■
Make sure camera is not in Close-up mode if you are more than
27.6 in. (70 cm) from your subject.
■
Place the camera on a flat, steady surface or use a tripod, especially
in high-zoom settings or in low light.