Kodak CFH-BVA10, Руководство пользователя

Страница: 3 / 6

SETTING UP YOUR CAMERA
Setting up your Camera for the first
time
1. From your smartphone, download the
Tend Baby app from the App Store or
Google Play. (Search for “Tend Baby
Kodak”)
2. Make sure your Camera is plugged in to
the Base Unit, and that the Base Unit is
powered on.
3. Enable WiFi on your smartphone or
tablet, as well as your home WiFi
network.
4. Open the WiFi settings on your
smartphone and connect to the network
“CFH-BVA10XXXX”, where XXXX are the
last 4 digits of your Camera’s MAC ID as
seen on the back of your Camera.
5. Once your smartphone or tablet
establishes connection to “CFH-
BVA10XXXX”, launch the Tend Baby app.
The Setup Wizard will guide you through
the remainder of the setup process.
Setting up your Camera again
If you change your home router, you will
need to set up your Camera again.
1.
Tap the button on the side of your
Camera to put it in Setup Mode.
2. Follow steps 3 – 5 in “Setting up your
Camera for the first time”.
Factory resetting your Camera
1. Press and hold the button on the side of
your Camera for 15 seconds.
2. Once the LED lights flash, release the
button.
You will need to set up your camera again.
SETTING UP YOUR BABY MONITOR
Setting up your Baby Monitor for the
first time
Your KODAK Baby Monitoring System is
ready to go right out of the box. Simply plug
in the power adaptors of the Parent Unit and
Base Unit, and power them on.