Troubleshooting
www.kodak.com/go/support
31
Picture is too light.
■
Move so there is at least 2 ft (0.6 m) between the camera and the
subject.
■
Decrease Exposure Compensation (see
page 22
).
Picture is not clear.
■
Clean the lens (
see page 38
).
■
Make sure your camera is not in Close-up mode.
■
Move so there is at least 2 ft (0.6 m) between the camera and the
subject.
■
Place the camera on a flat, steady surface or use a tripod.
Picture is too dark.
■
Turn on the flash (see
page 6
).
■
Move so there is no more than 7.9 ft (2.4 m) between the camera and
the subject.
■
Use Fill flash (
see page 6
) or change your position so light is not
behind the subject.
■
Increase Exposure Compensation (see
page 22
).
Camera does not
recognize SD card.
■
Purchase a certified SD card.
■
Insert a card into the slot, then push to seat (see
page 3
).
Camera freezes up
when a card is
inserted or
removed.
■
Turn the camera off, then back on. Make sure the camera is turned off
before inserting or removing a card.
Memory card full.
■
Insert a new card (see
page 3
).
■
Transfer pictures to the computer (see
page 27
).
■
Delete pictures/videos (see
page 12
).
If...
Try one or more of the following
