Troubleshooting
www.kodak.com/go/support
39
Flash does not fire
■
Check the flash setting and change as needed (
page 17
).
NOTE: The flash does not fire in all modes.
Storage location is
almost or entirely full
■
Transfer pictures to the computer (
page 11
). Delete pictures from
the card (
page 10
) or insert a new card.
■
Change image storage location to internal memory (
page 25
).
Battery life is short
■
Make sure the correct battery type is installed (
page 1
).
■
Wipe the contacts with a clean, dry cloth before inserting a battery
in the camera.
■
Insert a new or charged battery.
You cannot take a
picture
■
Turn the camera off, then on again. Make sure the camera is not in
Favorites mode.
■
Depress shutter button all the way (
page 4
).
■
Insert a new or charged battery (
page 1
).
■
Wait until the Ready light turns green before attempting to take
another picture.
■
Memory full. Transfer pictures to the computer (
page 11
), delete
pictures (
page 10
), change image storage location, or insert
another card.
Error message
appears on LCD
■
Turn the camera off, then on again.
■
Remove memory card from the camera.
■
Remove the battery and wipe the contacts with a clean, dry cloth.
■
Insert a new or charged battery (
page 1
).
■
If problem still exists, get help (
page 43
).
Memory card not
recognized or camera
freezes with card.
■
Card may be corrupted. Format card in camera (
page 28
).
■
Use another memory card.
Status
Solution
