0
CIS-236
August 2002
Wind Off
Check the frame-counter window to make
sure the “0” is aligned with the arrow.
If not, grip the camera and cover the lens,
press the
shutter button, and turn the
thumbwheel until the film is fully rewound.
The film is fully rewound when the
thumb-
wheel rotates freely and does not stop or lock.
Insert the special tool into the end slot.
Break Off Film Door
Using the special tool, hold the camera firmly
and pull upwards to break off the film door
and remove the film.
Remove Film
Insert Tool
Exposed
Film
Opened camera
with film removed.
shutter button
thumbwheel
5
• Place the used camera in the
Kodak recycle bin.
• Visit our Web site at
http://
www.kodak.com/go/kes for details
about Kodak’s recycling program.
• Call Kodak’s advertising distribution
center at (800) 847-8755 to order
a Kodak hand-opening tool.
CURRENT INFORMATION SUMMARY
Opening Instructions for the
KODAK FUN SAVER One-Time-Use Camera
Wear eye protection when opening all cameras.
CAUTION: Before you attempt the
opening tasks, make sure the tool is
fully engaged with the camera body to
prevent tool slippage.
CAUTION: This camera body contains
a high-voltage capacitor and circuit
board. To avoid electric shock, do not
pry apart the front and back sections
of the camera. Remove only the film
from its respective compartment. If
sections of the camera are separated,
do not touch the circuit board.
© Eastman Kodak Company, 2002
