8
.
Place the HUMIDIFIER PARTS from the KIT on the new inner right-hand PANEL.
Mount them as shown. Mount the CABLE DUCT first. The other parts can be
mounted in any sequence. For mounting the GROUND WIRE and PCB A16 see
step 9 and 10.
NOTE
All threads needed for mounting the HUMIDIFIER parts to the right-hand INNER SIDE PANEL are pre-
pared with SCREWS (removed in step 4). The purpose of these SCREWS is to make the SIDE PANEL light-
tight as long as no HUMIDIFIER is installed.
PCB A16
HUMIDIFIER
ASSEMBLY
CABLE DUCT
GROUND
WIRE
DRAIN
HOSE
PRESSURE
HOSE
TWIN WATER
VALVE
CONNECTOR
A4X31
CLAMP
CLAMP
CLAMP
CLAMP
HUMIDITY
SENSOR
100 mm
HOSE CLAMP
12.5
figure 1-6
II 3477-D
HUMIDIFIER ML2000 P
INSTALLATION INSTRUCTIONS
KODAK AG, Stuttgart
1-7
11/1997
