Troubleshooting
43
www.kodak.com/go/aiosupport
Status lights
The status lights indicate the condition of the printer. There are two status lights on
the printer, one that indicates power, the other indicates Wi-Fi status.
Power status light
Wi-Fi status light
Power light
What it means
Off
• The printer is turned off.
– Press the on/off button to turn on power.
• The printer does not have power.
– Make sure that the power cord is plugged into the back of the printer and
into an electrical outlet, and that the electrical outlet has power.
Blinking
• The printer is busy.
– Wait for the printer to finish the task.
On
• The printer is ready
Power light
What it means
Off
The Wi-Fi radio is either turned off, or is turned on but not connected to a
wireless network.
Blinks continuously
The Wi-Fi radio is turned on and the printer is searching for available wireless
networks within range.
Blinks intermittently
The Wi-Fi radio is turned on and the printer cannot find any available wireless
networks within range, or the Wi-Fi radio connection has been interrupted, or
is too weak to send signals to and from the printer
To find and connect to an available wireless network within range, press
OK
,
turn the Wi-Fi radio off, and run the WiFi Setup Wizard (see
Configuring a
wireless network connection, page 5
).
On
The Wi-Fi radio is turned on and there is a working connection between the
printer and a wireless network.
