3.After communication replace handset. However, if conversation
continue more than 3minutes, monitor screen is turned off
automatically. And if you want to communicate more time, press
button again.
■
■
KVM-524GS Monitor
Name of each part
Handset
●
To communicate
with door camera.
●
Button
To confirm visitor
without holding
the handset
●
Button
Door opens when this
button is pressed.
Available only for
the door equipped
with door opener.
●
Power Lamp
To check power
ON/OFF status
●
4 inch screen
To identify visitor
●
Button
To call and
communicate with
other monitor
or doorphone
●
Brightness Control
Knob
To control brightness
of monitor screen
Call Signal
●
Volume Control
Knob
To control calling
signal volume.
��
Identifying and talking to visitors
2-1 Hold handset and identify visitor.
Then, communicate with visitor. And,unless you replace handset
within 3minutes, the monitor screen is turned off automatically.
2-2 When the handset is held on and the call is made from the
camera, press button on the monitor. then communicate
with visitor.
2-3 While communicating with camera, if the internal call is
made from the extended monitor or doorphone, the beep signal
sounds in 5 sec. and disconnected with the camera automatically
Then you can communicate with extended monitor or doorphone
after pressing button on the monitor.
1.Call signal rings from the monitor, while
screen is turned on and visitor is appeared
automatically.
When visitor presses the call
button of door camera.
How to operate (Instruction for operating)
■
■
KC-D20 Metal Pinhole Camera
�
C-Mic
To communicate with Monitor
�
Speaker
When visitor calls on the phone, the
sound of communication is amplified
and it comes out of the speaker.
�
Speaker
�
Call Button
By pressing the button, the related
house will be called.
�
Call Button
■
■
KC-B61 Camera
�
C-Mic
To communicate
with Monitor
�
Camera Lens
Clear picture quality realized
by adopting 1/3" CCD
�
Power Lamp
To check power
ON/OFF status
