3.After communication replace handset. However, if conversation
continue more than 3minutes, monitor screen is turned off
automatically. And if you want to communicate more time, press
button again.
■
■
KVM-524G Monitor
Name of each part
Handset
�
To communicate
with door camera.
�
Button
To confirm visitor
without holding
the handset
�
Button
Door opens when this
button is pressed.
Available only for
the door equipped with
door opener.
�
Power Lamp
To check power
ON/OFF status
�
4 inch screen
To identify visitor
�
Button
To call and communicate
with other monitor
or doorphone
�
Brightness Control Knob
To control brightness
of monitor screen
�
Contrast Control Knob
To control contrast
of monitor screen.
Call Signal
�
Volume Control Knob
To control calling
signal volume.
��
Identifying and talking to visitors
2-1 Hold handset and identify visitor.
Then, communicate with visitor. And,unless you replace handset
within 3minutes, the monitor screen is turned off automatically.
2-2 When the handset is held on and the call is made from the
camera, press button on the monitor. then communicate
with visitor.
2-3 While communicating with camera, if the internal call is
made from the extended monitor or doorphone, the beep signal
sounds in 5 sec. and disconnected with the camera automatically
Then you can communicate with extended monitor or doorphone
after pressing button on the monitor.
1.Call signal rings from the monitor, while
screen is turned on and visitor is appeared
automatically.
When visitor presses the call
button of door camera.
How to operate (Instruction for operating)
■
■
KC-D20 Metal Pinhole Camera & KC-B61 Camera
�
C-Mic
To communicate
with Monitor
�
C-Mic
To communicate
with Monitor
�
Power Lamp
To check power
ON/OFF status
�
Speaker
When visitor calls,
the voice from monitor
comes out of the speaker.
�
Speaker
When visitor calls, the
voice from monitor comes
out of the speaker.
�
Call Button
By pressing the button, the
related house will be called.
�
Camera Lens
Clear picture quality realized
by adopting 1/3" CCD
