6
7
Name of each part
Installation
Product Spec
Mic : Voice input
Guard Call Button :
Used to call guard
Cancel Button :
Used to cancel calling
KLP-C410
Power Source
Power for internal operation
Lobby Phone Data Type
Call Type
Hands-free Type (2-Way)
PROTOCOL DATA TX/RX Type
Call & Video Waiting Time
30 second waiting time after call, 3 minutes for call to household.
Housing Material
Aluminum (A/L), PC, ABS
Dimension
(W)174 X (H)263 X (D)15 (mm)
Guaranteed Operation
Temperature
-10℃~50℃
LED On Feature
10-Key LED turned on for calling
Video Angle
Feature to adjust up, down, left, right (90°)
None
Link with RF Card
Not linked
13.56MHz
DC 12V
DC 15V~18V
(Standby:4W, Operation:10W)
Product Name
KLP-C410R
DC 15V~18V
(Standby:4W, Operation:10W)
Not linked
KLP-D410
DC 15V~18V
(Standby:3W, Operation:7W)
Components of product
1,50
0
1,22
0
1,78
0
Back case
Main Body
Box
Lobby Phone
Sun visor(Option)
Box(Option)
Mood Lamp :
Turns on to find it in night time
RF Card Reader :
Door opens by contacting of RF Card
(Available only with RF Card Model)
FND Display :
Displays household
number and during setup
10 Key Dial Button :
Displays household
number and during setup
Camera Lens :
Send video image during call
Call Button :
Used to call household
90°
Wiring Diagram
●For link with sensor :
- Setup
J P 1 : No relation
SW2 :
- Wiring
<Fire sensor>
Pin 7 of CNT7 : Fire sensor (+)
Pin 9 of CNT7 : Fire sensor (-)
<PIR sensor>
Pin 8 of CNT7 : PIR sensor (+)
Pin 9 of CNT7 : PIR sensor (-)
Sensor_GND
●External power connection with Dead bolt
Pin 5 of CNT7 - Dead bolt_GND
Pin 6 of CNT7
–
Connect to Dead bolt +
■Lobby Phone Terminals
■Lobby Phone Terminal Connection
●For link with dead bolt :
Dead bolt consumes a lot of current, so it is
essential to connect external power.
- Setup
J P 1 : Connect pin 1-2
SW2 :
- Wiring
Pin 8 of CNT12
–
Dead bolt +12V
Pin 9 of CNT12
–
Dead bolt_GND
1
1
3
1
3
2
1
9
JP1
CNT12
CNT7
CNT14
CNT4
SW2
1
10
8
●For link with Automatic Door :
- Setup
J P 1 : Connect pin 2-3
SW2 :
- Wiring
Pin 6 of CNT7-Connect Automatic door c and
Pin 8 of CNT12-Automatic door contact-(No polarity)
●For link with Striker :
- Setup
J P 1 : Connect pin 1-2
SW2 :
- Wiring
Pin 8 of CNT12
–
S12V
Pin 9 of CNT12
–
Connect Striker_GND
●Open/Close Contact
N/O
COM
N/C
A
B
C
D
1
1
3
1
3
1
9
JP1
SW2
1
10
8
CNT14 (Video Output)
8) GND
7) DVR VIDEO Output
6) GND
5) GND
4) Additional Lobby Video Input 2
3) Additional Lobby Video Input 1
2) VIDEO2 Output
1) VIDEO1 Output
A
CNT12 (for household connection)
9) Switch_GND
8) Switch Output (+)
7) DATA
6) VIDEO 1 Output
5) Voice2
4) Voice1
3) GND
2) NC
1) DC+15V
C
CNT7 (Sensor & Switch)
10) Fire & PIR sensor Power (+)
9) Fire & PIR sensor contact & GND
8) PIR sensor contact (+)
7) Fire sensor contact (+)
6) D/DEAD_BOL
5) DEAD_BOLT/ STRIKER_GND
4) Not Used
3) N/C Contact
2) COM Contact
1) N/O Contact
D
CNT4 Connection
3) GND
2) NC
1) +15V
B
JP1(DOOR TYPE)
2) N/O for 2, 3 connection
1) N/C for 1, 2 connection
Body Sensor
On the basis of
the center of
lobbyphone’s
lens
(Unit : mm)
Standard installation height of lobbyphone is 1,400~1,450mm
from floor to the bottom of flush mounting box.
In case that the installation height of lobbyphone is out of the
range (min.1,250mm~1,550mm), it’s hard to get proper
image, so be careful about the installation height of lobbyphone.
■Standard height for installation of Lobbyphone
Sub videophone
8P*300mm
Power
2P*300mm
Household
9P*300mm
DC 15V~18V / 2.0A Adapter
Sensor & Switch
10P*300mm
4×30mm Screw (4ea)
4×10mm Screw (2ea)
4×8mm Bolt (2ea)
3×12mm Screw (1ea)
“L”wench