Exterior Wiring Diagram
��
KCV-D350
Instructions for Operation
�
Calling from camera
�
Press the
“
Call
”
button
(when the
“
Call
”
button is
pressed, call signal sounds).
“
Ding-dong
”
�“
Ding-dong
”
The image come
up on the screen and Call signal
sounds.
�
If
“
Talk
”
button is
pressed, communication will
become available.
�
If
“
Talk
”
button is pressed
again, communication will be over.
�
Monitoring & Presto function ( )
※
For identifying image of camera.
�
If you press the button, image will be emerged on screen. If you press the
button once again, the screen will be turned off. (At this time, you can catch
sound only from camera. If you press the
“
Monitor & Presto
”
button ,
communication will become available).
※
Presto function (This function is available during only communication).
�
Only during communication, one-way communication is available while the
“
Monitor & Presto
”
button was being pressed for over 2 seconds. (You cannot hear from the camera, but the voice
from monitor is generated to the outdoors).
�
Door release function ( )
�
This function is available during only communication. Only while the
button is being pressed, door release function is on.
