User manual
4/4
Settings
Switch on
•
Press the Function button
○
for approx. 8 until you hear
Programming mode
a brief beep
•
The red and green LEDs will flash on the monitor
•
Programming mode switched on
Setting the ring-tones
•
Switch on the programming mode (see above)
•
Press Talk button
•
The red and green LEDs will flash on the monitor
Ring-tone for Entrance 1 (AS 0)
•
Press the Unlock door repeatedly until you hear the ring-
tone you require
Ring-tone for a Landing call
•
Press the Function button
○
repeatedly until you hear the
ring-tone you require
Ring-tone for Internal call
•
Press the Display button
□
repeatedly until you hear the
ring-tone you require
Ring-tone for Entrance 2 (AS 1-63)
•
Press the Talk button repeatedly until you hear the ring-
tone you require
Note
•
The ring-tones can be set in succession once the
programming mode has been activated
Colour saturation adjustment
•
Switch on the programming mode (see above)
•
Press Unlock button
•
The green LED will flash on the monitor
•
Using the Control buttons UP and DOWN adjust the
colour saturation to your liking
Brightness control
•
Switch on the programming mode (see above)
•
Press the Display button
□
•
The red LED will flash on the monitor
•
Using the Control buttons UP and DOWN adjust the
brightness to your liking
Switch off
•
If a button has not been pressed for 8 sec, the
Programming mode
programming mode will switch off automatically
•
A beep sounds; the red and green LEDs go out
•
Programming mode switched off
Subject to technical changes