Koch VTC40, Руководство пользователя, Страница: 4 / 4

User manual
René Koch AG 044 782 6000
Seestrasse 241 044 782 6001 Fax
8804 Au/Wädenswil info@kochag.ch BA VTC40 e 11.14
Settings
Switch on

Press the Function button
○
(6) for approx. 8 until you hear
Programming mode
a brief beep

The red and green LEDs will flash on the monitor

Programming mode switched on
Setting the ring tones

Switch on the programming mode (see above)

Press Talk button (1)

The red and green LEDs will flash on the monitor
Ring tone for Entrance 1 (AS 0)

Press the Unlock door (2) repeatedly until you hear the ring
tone you require
Ring tone for a Landing call

Press the Function button
○
(6) repeatedly until you hear
the ring tone you require
Ring tone for Internal call

Press the Display button
□
(5) repeatedly until you hear the
ring tone you require
Ring tone for Entrance 2 (AS 1-63)

Press the Talk button (1) repeatedly until you hear the ring
tone you require
Note

The ring tones can be set in succession once the
programming mode has been activated
Colour saturation adjustment

Switch on the programming mode (see above)

Press Unlock button (2)

The green LED will flash on the monitor

Using the Control buttons UP (3) and DOWN (4) adjust the
colour saturation to your liking
Brightness control

Switch on the programming mode (see above)

Press the Display button (5)
□

The red LED will flash on the monitor

Using the Control buttons UP (3) and DOWN (4) adjust the
brightness to your liking
Switch off

If a button has not been pressed for 8 sec, the
Programming mode
programming mode will switch off automatically

A beep sounds; the red and green LEDs go out

Programming mode switched off
Subject to technical changes