User manual
René Koch AG
044 782 6000
Seestrasse 241
044 782 6001 Fax
8804 Au/Wädenswil
BA TC40/alu e
09.15
Programming the ring tones
Switch on programming mode
•
Press the Function button
○
(6) for approx. 8 sec. until you hear
a short beep
•
The red and green LEDs will flash on the monitor
•
Press Talk button (1) briefly
•
The red and green LEDs will flash on the monitor
•
Programming mode switched on
Ring tone for Entrance 1 (AS 0)
•
Press the Unlock door repeatedly until you hear the ring tone
you require
Ring tone for Entrance 2 and
others (AS1-63)
•
Press the Talk button repeatedly until you hear the ring tone you
require
Ring tone for a Landing call
•
Press the Function button
○
repeatedly until you hear the ring
tone you require
Ring tone for an Internal call
•
Press the Function button
□
repeatedly until you hear the ring
tone you require
Switch off programming mode
•
If there has been no activity for 8 sec, the programming mode
switches off automatically
•
A beep sounds; the red and green LEDs go out
•
Programming mode switched off
Subject to technical changes
