Koch ALDUP/40 Series, Руководство пользователя, Страница: 4 / 4

User manual
4/4
Settings
Switch on

Press the Function button
○
for approx. 8 until you hear
Programming mode
a brief beep

The red and green LEDs will flash on the monitor

Programming mode switched on
Setting the ring tones

Switch on the programming mode (see above)

Press Talk button

The red and green LEDs will flash on the monitor
Ring tone for Entrance 1 (AS 0)

Press the Unlock door repeatedly until you hear the ring
tone you require
Ring tone for a Landing call

Press the Function button
○
repeatedly until you hear the
ring tone you require
Ring tone for Internal call

Press the Display button
□
repeatedly until you hear the ring
tone you require
Ring tone for Entrance 2 (AS 1-63)

Press the Talk button repeatedly until you hear the ring tone
you require
Note

The ring tones can be set in succession once the
programming mode has been activated
Switch off

If a button has not been pressed for 8 sec, the
Programming mode
programming mode will switch off automatically

A beep sounds; the red and green LEDs go out

Programming mode switched off