MFR-00
MFR-00 K01/0913
page 7
7. Maintenance
Depending on the used media and the employment of the y-strainer you have to
do the following:
•
Cleaning of the mesh
7.1 Cleaning of the mesh
Cut of the media flow and relieve the media pressure.
Keep ready some fit tanks to catch up leaking liquids.
Loosen the bonnet of the strainer. Catch up the running out liquid. Take the
bonnet aside and pull the mesh out of the body.
Clean the body and the mesh or exchange the mesh for a new one.
Insert the mesh into the body of the y-strainer.
Screw the bonnet into the body. Observe the correct placement of the seals in
the bonnet and take care that there will be no pollution on the seals or the seat.
Tighten the bonnet with a fit spanner.
Check the tightness of all connections.
Y-strainer, cleaning of the mesh
