Heinrichs Messtechnik GmbH
Operating Manual K09
Page 19 of 28
12
CE marking
The measuring system meets the statutory requirements of the following EU directives:
2014/34/EU (ATEX) Equipment for Use in Potentially Explosive Atmospheres
2014/30/EU (EMC) Electromagnetic Compatibility.
With respect to the Pressure Equipment Directive 2014/68/EU, the devices fall within the scope of application
of Article 4, Paragraph 3, and therefore requires no CE marking in accordance with this directive.
By attaching the CE logo, Heinrichs Messtechnik confirms compliance with these directives.
13
Available accessories
1 inductive limit switch ; mono-stable or bi-stable
Special connections
14
Order information
Please include the following information in your order:
Product data,(specific weight, temperature, pressure, viscosity) material design, connection size, measuring
range, desired accessories, required approvals and material certificates.
15
Standards and directives
VDE/VDI 3513
Measuring range rated and converted to other products
Directive 2014/34/EU
Equipment for Use in Potentially Explosive Atmospheres
DIN EN ISO 80079-36
Non-electrical equipment for use in potentially Explosive Atmospheres
For the electrical sensor
EN 60079-0
Explosion protection; General regulations
EN 60079-11
Explosion protection; intrinsical safety
Directive 2014/30/EU
EMC directive
NAMUR NE 21
recommendation: EMC for industrial processes and laboratory
EN 60529
Degrees of protection through housing (IP code)
EN 61010-1
Safety requirements for electrical measure, control & laboratory devices
EN 60947-5-6:2000
Low voltage switchgear and controlgear (NAMUR)
