DAG-A34
DAG-A34 K06/0722
page 11
10. Reset to default values
To return the unit to a
defined basic state
, a reset can be carried out to the default
values. The following procedure should be used:
•
Switch off the power supply
•
Press button [
P
]
•
Switch on voltage supply and press
[P]-
button until
„- - - -“
is shown in the display.
With reset, the default values of the program table are loaded and used for
subsequent operation. This puts the unit back to the state in which it was supplied.
Caution! All application-related data are lost.
