3. Attach the pole attachment piece (2) to the right space.
4. Mount the pole in the prepared hole (3).
5. Adjust the lamp properly and attach its base to the pole (4).
INSTALLATION C - ON STRAIGHT POLE
1. Prepare lamp, accessories and tools well firstly.
2. Remove the nut spacer of U-shaped bracket (1).
3. Use the U-shaped bracket to fix the lamp on the pole (2).
4. Loosen the screws at both ends of the bracket and adjust the angle of the lamp as needed, which
is 20° adjustable in clockwise direction and 10° adjustable in couterclockwise direction, then tighten
the screws (3/4).
OPERATING MODE
This luminaire has a programmed automatic mode of operation, so that it activates after dusk and
deactivates during the dawn.
However, you should first remotely switch on the device by pressing
the ON / OFF button which is located as shown in the picture above.
