OPER ATOR’S MANUAL
KOBE
ELECTRICAL APPLIANCES
INSECT KILLERS
Read all of this manual before using your Insect Killer and retain for future reference.
gepruite
sicherhelt
© The Kennedy Group Ltd. 08/07
Kobe Tools continually strives to improve its products. Specifications may change without prior notice.
KOBE PRODUCTS carry a one years manufacturers warranty.
KOBE PRODUCTS are designed & produced to the highest standards & specifications
KOBE PRODUCTS are fully guaranteed against faulty materials & workmanship
Should they be found to be defective, they will either be repaired or replaced
free of charge (fair wear and tear and/or misuse excepted).
This does not affect your legal rights.
Please retain supplier invoice as proof of purchase.
QUALITY GUARANTEE & WARRANTY
KOBE TOOLS Official Agents:
JAPAN: MIKI TOOL TRADING CO. MIKI CITY, JAPAN.
EUROPE, MIDDLE EAST, AMERICA & AFRICA: THE KENNEDY GROUP LTD, WIGSTON, ENGLAND.
For EU and EEA countries only.
In observance of European Directive 2002/96/EC on Waste Electrical and Electronic Equipment
(WEEE) and its implementation in accordance with national law, electrical goods that have reached
the end of their life must be collected separately and returned to an environmentally compatible
recycling facility.
Do not dispose of electrical goods with domestic waste materials as inappropriate disposal may
cause potential hazards to the environment and human health.
For further information, please contact your local authority or the retailer from whom you purchased
the product.
A comprehensive repair and service
facility is available through your
local Kobe agent.
SERVICE & REPAIR
To clean your Insect Killer, firstly switch off
the unit and disconnect from the power
supply.
Take the unit down from its hook and
remove the fly tray from inside the bottom
of the unit and clean with soapy water, dry
and replace.
If the outer casing and grills need cleaning,
remove the outer grills completely after
unscrewing, as shown in fig.5. They can
n o w b e c l e a n e d i n a d e g r e a s a n t i f
neccessary, dried and replaced.
The outer casing can be cleaned using a
soft cloth dampened with a kitchen cleaner
or degreasant but take care not to get too
wet and make sure the unit is thoroughly
dry before using.
KOBE
E L E C T R I C A L
APPLIANCES
CLEANING
Order Code
KBE-787-0050K
Model No.
IKE040
Power 40W
(Max)
Net
Weight
4.1kg
Voltage
AC 220-240V 50Hz
Output
3500 - 7000v
Order Code
KBE-787-0040K
Model No.
IKE020
Power 20W
(Max)
Net
Weight
2.75kg
Voltage
AC 220-240V 50Hz
Output
3500 - 7000v
3500 – 7000v Output
2 Flourescent attraction tubes
Slim design profile
Insect catching tray
Fitted with plug in accordance with BS3456.
KBE-787-0040K_0050K_Instructions.qxd 03/10/2007 10:28 Page 1
