KOBE CHX-30 Series(400 CFM-LED), Инструкция по установке и руководство по эксплуатации

Страница: 9 / 24

Vent option installation
1. Choose the require vent option.
NOTE: If the hood is to be installed as ductless
application, please do not remove any duct
knockout located at the top or the back of the
hood.
2. For 7” Round vent installation only:
-
Using a flat-head screwdriver to remove the
7” duct knockout. (Refer to Figure 5)
- Attached the 7” exhaust plate using 8
screws (provided). Refer to Figure 6.
3. For 3-1/4” x 10” vent installation only:
- Using a flat-head screwdriver to remove the
top OR the rear 3-1/4” x 10” duct knockout.
(Refer to Figure 7)
-
Attached the 3-1/4” x 10” exhaust plate
using 6 screws (provided). Refer to Figure
8 for Top Vent OR Figure 9 for Rear Vent.
4. For ductless installation only.
-
Remove the recirculating plate located at
the top of the hood, refer to Figure 10.
- Reinstall the recirculating plate horizontally
as shown in Figure 11.
Figure 5
Figure 6
Figure 7
Figure 8
Figure 9
Figure 10
Figure 11