KEB-611
Hydraulic Crimping Tool
www.grupotemper.com
6
Figure 10.
Pull the plug
Finish adding oil, please reassemble the parts in sequence.
2. Q
：
The die cannot be positioned while pressing.
A
：
The causes are:
<1> Shortage of Oil Please add oil in the reservoir up to full.
<2> Air inside Please add oil in the reservoir up to full.
<3> Impurities inside the reservoir
Exchange new Hydraulic oil.
<4> Impurities inside the tool Take apart the inner parts and clean
them. Then reassemble them.
Figure 8.
Release the pressure
Figure 9
.
Dismantle
the fixed
handle
Figure 11.
Add oil
