5
4
6
ASSEMBLY INSTRUCTIONS
4. Choose the correct impact socket
(not provided) as needed and mount it onto
the anvil (B). (See Figure 4)
5. If longer reach is necessary, use an extension
bar (not provided) and then mount impact
socket (not provided) onto the bar.
(See Figure 5)
6. Connect air supply hose to the male plug. Set
the working pressure at 90 PSI for best tool
performance. (See Figure 6)
Only use impact sockets that have an RPM
rating equal to or greater than the tool itself.
WA R N I N G
10
NOTE
Working pressure refers to the air line
pressure set to tool when tool is under working
conditions.
