Kobalt 4913883, Руководство пользователя

Страница: 13 / 48

13
OPERATING INSTRUCTIONS
h. Replace the outer flange (K) with the clamping (wider diameter) surface facing the blade.
i. Depress and hold the spindle-lock button (P) and replace the blade bolt (J).
j. Tighten the blade bolt securely by turning it counterclockwise with the blade wrench (Y).
NOTICE: Do not use a blade wrench with a longer handle, since it may lead to over tightening
of the blade bolt.
Removing the Saw Blade (Fig. 3)
a. Remove the battery pack from the saw.
b. Depress and hold the spindle-lock button (P).
c. Loosen the blade bolt (J) by turning it clockwise with the blade wrench (Y).
d. Remove the blade bolt and outer flange (K).
e. Retract the lower blade guard (I) and then remove the blade (L).
4. Blade Guard System
The lower blade guard (I) on the circular saw is
there for the operator’s protection and safety. Do
not alter it for any reason.
If the lower blade guard becomes damaged or if the
blade begins to run slowly or sluggishly, DO NOT
operate the saw until the damaged part has been
repaired or replaced. ALWAYS leave the guard in its
correct operating position when using the saw.
DANGER:
• When sawing through a workpiece, the lower
blade guard does not cover the blade on the
underside of the workpiece. ALWAYS keep
hands and body away from the cutting area. Serious injury will result if any part of the body
comes into contact with the moving blade.
WARNING:
• To avoid possible serious injury, never use the saw when the lower blade guard is not
operating correctly. Check the lower blade guard for correct operation before each use, it
should move freely and return instantly to the closed position. If the saw is dropped, check
the lower blade guard and bumper for damage at all depth settings before using it.
• If the lower blade guard does not snap close at any time, take it to a qualified service
technician for repair.
1
3
2
4
I