12
CARE AND MAINTENANCE
To promote longer life of the power cleaner:
• Do not run over the hose with vehicles or drag over sharp surfaces, as this could damage the
hose and cause leaks.
• Run clean, fresh water through the kit, then turn off pressure washer and water supply.
• Depressurize by squeezing the gun trigger until all the water has been drained out of the Unit.
• Unit can now be disconnected safely for storage in a cool dark area, or to remove debris from
individual parts.
Keep hose away from hot surfaces (like a muffler). If hose develops a leak, do not try to repair it.
REPLACE THE ENTIRE HOSE. Hose is for cold water pressure washers only. DO NOT use with hot
water or steam service.
WARNING
