Kobalt 1694003, Руководство пользователя

Страница: 9 / 28

9
OPERATING INSTRUCTIONS
1. To Attach Battery Pack
a. Align the raised portion on the battery pack
with the grooves on the bottom of the tool,
then slide the battery pack onto the tool, as
shown.
b. Make sure that the latches on the battery
pack snap into place and the battery pack is
secured to the tool before beginning operation.
NOTICE: When placing the battery pack on the
tool, be sure that the raised rib on the battery pack
aligns with the groove on the tool and the latches
snap into place properly. Improper assembly of
the battery pack can cause damage to internal
components.
To Detach Battery Pack
a. Press the battery-release buttons to release the battery pack.
b. Pull backward on the battery pack to remove it from the tool.
WARNING
• Battery tools are always in operating condition. Therefore, always remove the battery pack
when the tool is not in use or when carrying the belt sander at your side.
2. To Install Sander Belt
WARNING
Always remove the battery from the sander before
attaching or removing sandpaper.
a. Place sander on its side and pull the quick-
release tension lever (F) out.
b. Insert the new sander belt (J) around both
rollers. Ensure that the arrow on the inside of
the sander belt is pointing in the direction of
rotation as indicated on housing.
Once the sander belt is centered over the rollers
and the bottom plate, place the quick-release
tension lever back in its original position to restore
belt tension.
To Detach Sander Belt
a. Place the sander on its side and pull the quick-
release tension lever.
b. Pull and remove the sander belt.
2a
F
2b
J
1
Battery-release
button