19
CARE AND MAINTENANCE
All maintenance should only be carried out by a qualified service technician.
Cleaning
Before cleaning or performing any maintenance, remove the battery pack. For safe and
proper operation, always keep the tool and its ventilation slots clean.
Always use only a soft, dry cloth to clean your circular saw; never use detergent or alcohol.
TROUBLESHOOTING
WARNING
Turn the switch to the “OFF” position and remove the battery before performing troubleshooting
procedures.
PROBLEM
POSSIBLE CAUSE
CORRECTIVE ACTION
Tool does not work. Low battery capacity.
Charge the battery pack.
Blade binds, jams,
or burns the wood
1.Improper operation.
1. See “OPERATING INSTRUCTIONS”
section.
2.Dull blade.
2.Replace or sharpen blade.
Saw vibrates or
shakes
1.Improper blade.
1.Replace blade.
2. Improper operation of
installing blade.
2. Remove the blade and reinstall it, ensure
no part was missed.
