Kobalt 0672824, Руководство пользователя

Страница: 13 / 28

13
CARE AND MAINTENANCE
All maintenance should only be carried out by a qualified technician.
Cleaning
Before cleaning or performing any maintenance, remove the battery pack from the impact driver.
For safe and proper operation, always keep the tool and its ventilation slots clean.
Always use only a soft, dry cloth to clean your impact driver; never use detergent or alcohol.
TROUBLESHOOTING
WARNING
• Place the direction-of-rotation selector (C) in the center lock position and detach the battery pack
from the impact driver before performing troubleshooting procedures.
PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION
The impact wrench
does not work.
The battery pack is depleted. Charge the battery pack.
The socket cannot
be installed.
The socket does not fit the
sleeve.
Use a suitable adapter or claimed capacity
socket.
The motor is
overheating.
Be sure cooling vents are free
of dust and obstacles.
Clean and clear the vents. Do not cover the
vents with your hand during operation.
The LED worklight
blinks rapidly.
The tool has stopped working
to protect internal circuits.
Release the trigger switch, wait for the tool
to cool down, then and start the tool again.
The LED worklight
blinks slowly.
The battery charge is very low. Charge the battery.
WARRANTY
For 5 years from the date of purchase, the impact driver is warranted for the original purchaser to
be free from defects in material and workmanship. This guarantee does not cover damage due to
abuse, normal wear, improper maintenance, neglect, unauthorized repair/alteration, or expendable
parts and accessories expected to become unusable after a reasonable period of use.
If you think your product meets the above guarantee criteria, please return it to the place of
purchase with valid proof of purchase and the defective product will be repaired or replaced at no
charge. This guarantee gives you specific legal rights, and you may also have other rights that
vary from state to state.