11
ASSEMBLY INSTRUCTIONS
4
5
4. Mount a 1/4 in. to 3/8 in. adapter (not provided) onto the
anvil (B) if necessary, and then choose the correct impact
socket (not provided) as needed and mount it onto the
adapter (See Figure 4).
Only use adapter and sockets that have a torque rating
equal to or greater than the tool itself.
WARNING
Before using tool, always make sure attachments are
properly mounted/secured. If attachments are not properly
mounted/secured, they can present a serious hazard and
may cause bodily injury for the operator or anyone in or
around the work area. Always follow the attachment
manufacturer's specifications for properly attaching
accessories to tool.
5. Connect air supply hose to the male plug. Set the working
pressure at 90 PSI for best tool performance (See Figure 5).
NOTE
Working pressure refers to the line pressure reading
OPERATING INSTRUCTIONS
1
Counterclockwise
1. To tighten or secure the threaded fasteners/workpiece, turn
the forward/reverse knob (C) counterclockwise to the forward
position. Press the trigger (D). The tool anvil (B) runs
clockwise tightening/securing the threaded fasteners/
workpiece.
Press
when tool is under working conditions.
B
