KDC User Manual A
PPLICATION
G
ENERATION
11
Revision 1.0
Copyright®2012-2021, KOAMTAC, Inc.
2.
Operating your SLED-mPOS
2.1
Basics
Read NFC Tag (MIFARE)
1. The host application sends a command to enable the NFC Reader.
2. Touch NFC tag to the NFC antenna symbol on the front case, and make sure
the tag and case are within 4cm of each other.
3. The
SLED-mPOS
will send the NFC tag UID to the host application and the
user will hear a short beep if it has been read successfully.
Read Magnetic-Stripe Card
1. The host application sends a command to enable the MS Card Reader.
2. Swipe MS Card either top to bottom or bottom to top. Make sure the
magnetic stripe of the card face to the
SLED-mPOS
.
3. The
SLED-mPOS
will send the MS card data to the host application and the
user will hear a short beep if it has been read successfully.
Read IC Card
1. The host application sends a command to enable the IC Card Reader.
2. Insert IC Card to the IC Card Reader located in the left side of
SLED-mPOS
.
Make sure the IC of the card face to up.
3. The
SLED-mPOS
will send the IC card data to the host application.
