KoamTac SKXPro, Быстрое руководство

Страница: 3 / 24

Quick Guide
See Reference Manual for more detailed information
Visit
store.koamtac.com to purchase additional SKXPro and accessories.
QG_SKXPro_20200618 p2
Product Introduction
The SKXPro is a 2D Imager Barcode Data Scanning Sled for the Samsung Galaxy XCover Pro. It is connected to
the XCover Pro via the USB Type C port at the bottom of the SKXPro. Data between the SKXPro and XCover
Pro is transferred through this physical connection, not by Bluetooth.
1.1 SKXPro Diagram
①
Left & Right Scanning Keys (for SKXPro)
②
VOLUME UP Key (for XCover Pro)
③
VOLUME DOWN Key (for XCover Pro)
④
SIDE Key (for XCover Pro)
⑤
XCover Key (for XCover Pro)
⑥
Top Key (for XCover Pro)
⑦
Hand strap Holes (for SKXPro)
⑧
USB Port to access XCover Pro from PC
⑨
Barcode Scan Window (for SKXPro)
⑩
Charging Pogo Pins (to charge XCover Pro)
⑪
Screw Holes (for SKXPro)
1.2 How to Turn On and Off
Refer to the figure in section 1.1 to locate the keys.
SKXPro does not have its own battery but rather uses power from the XCover Pro’s battery . The SKXPro works
only when the XCover Pro is mounted into SKXPro Scanning Sled.
To turn on XCover Pro, press and hold the SIDE key for 3 seconds.
To turn off XCover Pro, press and hold the VOLUME DOWN key and SIDE key at the same time for 3 seconds.