KDC300
Quick Guide
See Reference Manual for more detailed information.
Visit
to purchase additional products and accessories.
QG_KDC300_20201014 p6
3.4
Using KTSync Keyboard – iOS
Once your KDC is connected to KTSync, you can use your KDC as a keyboard.
a)
Navigate to the iPhone/iPad/iPod Settings > General > Keyboard > Keyboards > Add New Keyboard...
> Select the KTSync keyboard to be added. (Fig. 6)
b)
Select the KTSync Keyboard and toggle the switch to Allow Full Access. (Fig. 7)
< Fig. 6 >
< Fig. 7 >
c)
Open the application you want to scan into and tap on the screen, so the on-screen keyboard appears.
d)
Press and hold the globe icon located to the left of the spacebar.
e)
Select the KTSync Keyboard and begin scanning. (Fig. 8)
< Fig. 8 >
Note: The KDC must be connected to KTSync & the KTSync keyboard must be selected for this to work.
