KDC100 Programming Manual
Format:
‘t’
Output:
‘
xxxxxxxx
@’ where
xxxxxxxx
is the timeout value for barcode read operation and @ means the end
of data
Purpose:
Get the current read timeout setting.
‘U’
command
Parameters: 0, 1,2 or 3
Format:
“U
xxxx
#” where
xxxx
is the value of parameter in hex.
Output:
‘!’ – invalid parameter.
‘@’ – all other times.
Purpose:
Selects how KDC100 handles scanned barcode.
If the value
xxxx
is 0: KDC100 doesn’t store scanned barcode in the memory and just transmits it
to the host.
1: KDC100 stores scanned data in the memory and transmits it to the host.
2: KDC100 stores scanned data in the memory but doesn’t transmit it to the host.
3: KDC100 stores scanned data in the memory only if succeeded to send read barcode to host.
‘u’
command
Parameters: None
Format:
‘u’
Output:
‘
xxxxxxxx
@’ where
xxxxxxxx
is the value sent to KDC100 by command ‘U’.
Purpose:
Get the current setting of barcode handling mode.
‘W’
command
Parameters: None
Format:
“W”
Output:
‘@’ – all the times.
Purpose:
Wake up KDC100 from sleep mode.
To ensure that KDC100 woke up from sleep, it is required to send ‘W’ command many times.
