3.5.2
Room Temperature
Parameter name
Values
Room temperature
Temperature Source 1
75% Temp. Source 1 - 25% Temp. Source 2
50% Temp. Source 1 - 50% Temp. Source 2
25% Temp. Source 1 - 75% Temp. Source 2
Temperature Source 1
Internal sensor
Temperature Probe IN1
Temperature Probe IN2
Temperature Probe IN3
Temperature Probe IN4
External object
Temperature Source 2
(If enabled)
Internal sensor
Temperature Probe IN1
Temperature Probe IN2
Temperature Probe IN3
Temperature Probe IN4
External object
These parameters allow selection of the temperature sources used to measure room temper-
ature. If more than one source is selected, their values can be averaged in a configurable
proportion (75% / 25%, 50% / 50%, or 25% / 75%).
For each temperature source it is possible to select the internal temperature sensor, an external
temperature probe connected to one of the four available multifunction inputs (IN1...IN4), or
(for temperature source 1), an external communication object. If the latter is selected, a com-
munication object
External temperature source
(DPT 9.001) will be enabled for this purpose.
Note
When using an external probe connected to one of the multifunction inputs as a tempera-
ture source, make sure to configure the input accordingly.
3.5.3
Setpoints
Parameter name
Values
Setpoint method
Absolute
/ Relative
3.5
Thermostats
85
