3.5
Thermostats
The Thermostat 1 and Thermostat 2 configuration sections will be available if the corresponding
functions have been enabled in the Main configuration section.
Both thermostats are completely identical in terms of functionality and configuration. For a
detailed functional description, see
on page 28.
3.5.1
General
Thermostat function
Parameter name
Values
Thermostat function
Heating only
/ Cooling only / Heating and
cooling
Heating / Cooling switching
(Only if “Heating and cooling” is selected)
Manual
/ Automatic
Changeover protection band
(Only for Automatic switching of Heating /
Cooling)
5
... 100 (x 0.1ºC)
Heating / Cooling mode after programming
(Only if “Heating and cooling” is selected)
Heating
/ Cooling
The
thermostat function
parameter allows selecting the thermostat function: Heating only, cool-
ing only, or both heating and cooling. Depending on the selected option, additional “Heating”
and “Cooling” configuration sections will be enabled.
If “Heating and cooling” is selected, the
Heating / Cooling switching
parameter determines
whether switching between heating and cooling will be done manually or automatically.
• Manual switching: Switching is done through a
Heating / Cooling mode
communication
object. Writing a “1” to this object switches to Heating mode; writing a “0” switches to
Cooling mode.
• Automating switching: The thermostat automatically manages the changeover between
heating and cooling. In this case, the
Changeover protection band
parameter is also
enabled. See
on page 32 for a detailed description of the
automatic switching logic.
3.5
Thermostats
83
