Configuration
3
3.1
General considerations
This chapter describes the configuration parameters available in the ETS product database.
Configuration parameters are organized in groups, or
configuration sections
; this chapter follows
the same structure. For each section, the corresponding configuration parameters are shown in
table format. For each parameter, available options are listed. The default value is indicated in
bold
.
Some parameters allow entering text values. These are labeled as [Text field] in parameter
tables. Regular text fields have a maximum length of 20 bytes. Text fields used for units in
numerical values have a maximum length of 6 bytes.
Note
All texts are stored using Unicode UTF-8 encoding. Encoding of ASCII characters requires
1 byte per character; however, encoding of characters outside the ASCII range requires
more than 1 byte per character. Thus the maximum number of characters allowed will
depend on the actual characters used in the text. It is recommended to check that the full
texts are actually visible on the screen after programming.
Some parameters allow selecting an icon. These are labeled as [Icon selection]. For a complete
list of available icons, please refer to the Iddero Verso icon list, available for download from
43
