Knuckleduster Gunfighter's Ball Boarding House, Инструкция по эксплуатации

Страница: 5 / 10

ASSEMBLY INSTRUCTIONS
4. Begin assembling interior walls around the stairs. Be
sure to use white glue to give yourself time to make ad-
justments to get things to fit properly!
5. The tall plate with railing at the top goes up against the
back box of the stair unit, then the stack of stair treats is
snugged up against it as shown.
6. Another wall is glued in place perpendicular to the tall
wall, and also snugs up against the stairs.
7. Put together the top flight of stairs, numbered as shown.
8. Build the back side of the stair block by
bluing the rear wall against the stairs., the
glue the top flight of stair treads in place.
NOTE: If you plan on doing extensive painting or wallpapering on the inside, it is best to wait to install
the windows and doors until after the walls are decorated. In that case, you would prime and paint the
doors and windows/frames before installing them in the building.