KnTech KNEx Series, Руководство пользователя

Страница: 15 / 23

SIP Config
Menu Name Description
Choose to configure the first few SIP accounts, there are six to choose from. Configure after selecting an account
SIP function Set to enable/disable sip account
Registration switch Turn this switch on to enable it and dock with the server.
Anti-registration switch Some servers do not support this feature and must be turned off.
Configure the SIP registration server signaling port.
Registration cycle Register sip server time settings
Show the name
Configure to display the name. When the caller can be called, the called party (named without
calling the caller) can display this configuration parameter and allow English letters to be entered.
Account number Server account
Authentication ID Server ID
Password Configure the password for the SIP registration account.
SIP heartbeat
Configure the server’s detection interval. If the phone turns on the SIP detection server function,
the phone detects whether the server responds every configured time.
Sever1
Configure the SIP registration server address to support the address in the form of a domain
name.
Server port Configure the SIP registration server signaling port.
Domain name
Configure the SIP registration server address to support the address in the form of a domain
name.
Server 2 (alternate server)
Configure the same server 1, if the first server is broken, automatically switch to the second or
third standby server, and then automatically switch. Priority is given to the first server. When the
first server repairs OK, the system will automatically jump back to using the first server.
Server 3 (alternate server)
Dialing rules
Add one: Click to add one, it will create a new dialing rule.
Delete: Select the existing rules below and click ‘Delete’.
Matching rule: "." means arbitrary. Add other rules according to requirement
Transfer rule: no need to fill in
Server IP: Server IP Address
Server port: server port number
Peer-to-peer configuration: for example, the other party number 625, the other party's IP address
192.168.80.187, and the other party's port number 5060.
After the configuration is completed, as shown in the figure above.
After the configuration is complete, click ‘ Save’ and restart to take effect.