IA8201 Raspberry Pi Quick Start Guide
knowles.com | AUD-ESP-00519, v0.1
©2021; Knowles Electronics, LLC, Itasca, IL, USA, All Rights Reserved. SiSonic,
Knowles are the trademarks of Knowles Electronics, LLC
1.5 Hardware Setup
Connect Raspberry Pi to the Connector board.
Figure 2: Raspberry Pi and IA8201-LT
Connect IA8201 through flex cable
Figure 3: Open Flex Connector
Open Flex connector by pressing on each side (shown by arrows in
Figure 3
)
Place Flex in (blue side up) and close the connector by pushing the sides in. It will be flush as
in
Figure 4
Connect your desired mic array with the other flex cable the same way to the IA8201-LT
board
Note:
Left side of connector is open and right side is closed to illustrate difference in the pictures.
1.6 Start-up
Connect Raspberry Pi to monitor and plug in micro USB
Figure 4: Closed Flex
Connector
Open Flex
Connector
