KNOVA KN RO-1304, Руководство пользователя

Страница: 2 / 20

DESCRIPTION OF THE TOOL
WARNING
Read,
understand and follow all
safety rules and instructions
before using this tool.
Please keep this manual
for future reference.
1. MAIN PARTS
1. Switch
2. Rubber roller
3. Lock handle
4. Spindle lock button
5. Lock nut
6. Milling cutter
7. Clip knob
8. Carbon brush cap
9. Transparent guard
10. Base guide
11. Adjusting knob
TOOL SPECIFICATIONS
Model
Rated voltage (V):
Rated frequency (Hz):
Rated input power (W):
No load (min-1):
Milling cutter diameter
Weight (Kg)
Protect grade
Insulated grade
KN RO-1304
120 V
60 Hz
450 W
29,000 r/min
1/4” (6.35 mm)
1.5 kg
E
GENERAL SAFETY RULES
WARNING
Read all instructions. Failure to follow all
instructions listed below may result in electric shock,
fire and/or serious personal injury. The term “power
tool” in all of the warnings listed below refers to your
mains operated (corded) power tool or battery
operated (cordiess) power tool.
SAVE THESE INSTRUCTIONS
• WORK AREA
1) Keep work area clean and well lit. Cluttered and dark
areas invite accidents.
2) Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases or
dust. Power tools create sparks wihch may ignite
the dust or fumes.
3) Keep chidren and bystanders away while operating a
power tool. Distractions can ause you to lose control.
• ELECTRICAL SAFETY
1) Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodifled plugs and
matching outlets will reduce risk of electric shock.
2) Avoid body contact with earthed or grounded surfaces
such as pipes, radiators, ranges and refrigerators. There
is an increased risk of electric shock if your body is
earthed or grounded.
3) Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk
of electric shock.
4) Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges or moving parts. Damaged
or entangled cords increase the risk of electric shock.
5) When operating a power tool outdoors, use an extension
cord suitable for outdoor use. Use of a card suitable
for outdoor use reduces the risk of electric shock.
• PERSONAL SAFETY
1) Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a power
tool while you are tired or under the influence of drugs,
alcohol, or medication. A moment of inattention while
operating power tools may result in serious personal injury.
2) Use safety equiplent. Always wear eye protection. Safety
equipment such as a dust mask, non-skid safety shoes,
hard hat, or hearing protection used for appropriate
conditions will reduce personal injuries.
3) Avoid accidental starting. Ensure the switch is in
the off-position before plugging in. Carrying power tools
with your finger on the swich or plugging in power tools
that have the switch on invites accidents.
4) Remove any adjusting key or wrench before turning the
tool on. A wrench or a key that is left attached to a rotating
part of the power tool may result in personal injury.
5) Do not overreach. Keep proper footing and balance
at all times. This enables better control of the power
tool in unexpected situations.
6) Dress properly. Do not wear loose clothing or jewellery.
Keep your hair, clothing, and gloves away fron moving
parts. Loose clothes, jewellery or long hair can be
caught in moving parts.
7) If devices are provided for the connection of dust
extraction and collection facilities, ensure that these are
connected and properly used. Use of these devices can
reduce dust-related hazards.
• POWER TOOL USE AND CARE
1) Do not force the power tool. Use the correct power tool
for your application. the correct power tool will do the job
better and safer at the rate for which it was designed.
2) Do not use the power tool if the switch does not turn it on
and off. Any power tool that cannot be controlled with the
switch is dangerous and must be repaired.
/II