KNOVA KN AG-450, Руководство пользователя

Страница: 2 / 20

TECHNICAL SPECIFICATIONS
GENERAL POWER TOOLS WARNING
WARNING: Read all safety
warnings and all instructions.
Failure to follow the warnings and
instructions may result in electric shock,
Save all warnings and instructions for
future reference.
The term “power tool” in the warnings
refers to your mains-operated (corded)
power tool or battery-operated (cordless)
power tool.
1) Work area safety.
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in
explosive atmospheres, such as in the
or dust. Power tools create sparks
which may ignite the dust or fumes.
c) Keep children and bystanders away
while operating a power tool. Distractions
can cause you to lose control.
2) Electrical safety.
a) Power tool plugs must match the
outlet. Never modify the plug in any
way. Do not use any adapter plugs
with earthed (grounded) power tools.
will reduce risk of electric shock.
b) Avoid body contact with earthed or
grounded surfaces, such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of electric
shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet
conditions. Water entering a power tool
will increase the risk of electric shock.
d) Do not abuse the cord. Never use the
cord for carrying, pulling or unplugging
the power tool. Keep cord away from
heat, oil, sharp edges or moving parts.
Damaged or entangled cords
increase the risk of electric shock.
e) When operating a power tool
outdoors, use an extension cord
MODEL NO.
Disc diameter
Voltage
Frequency
Rated power
KN AG-450
4-1/2” (115 mm)
120 V
60 Hz
850 W No-load speed
Net/gross weight
Standard
accessories
11,000 r.p.m.
2.30/2.55 kg.
suitable for outdoor use. Use of a
cord suitable for outdoor use reduces
the risk of electric shock.
f) If operating a power tool in a damp
location is unavoidable, use a residual
current device (RCD) protected
supply. Use of an RCD reduces the
risk of electric shock.
3) Personal safety.
a) Stay alert, watch what you are doing
and use common sense when operating
a power tool. Do not use a power tool
of drugs, alcohol or medication.
A moment of inattention while operating
power tools may result in serious
personal injury.
b) Use personal protective equipment.
Always wear eye protection. Protective
equipment such as dust mask, non-skid
safety shoes, hard hat and hearing
protection used for appropriate conditions,
for to reduce risk of personal injuries.
c) Prevent unintentional starting. Ensure
the switch is in the off-position before
connecting to power source, picking
up or carrying the tool.
the switch or energising power tools that
have the switch on invites accidents.
d) Remove any tool before starting the
power tool. A wrench or a wrench
near a rotating part of the power tool
may result in personal injury.
e) Do not overreach. Keep proper
footing and balance at all times. This
enables better control of the power
tool in unexpected situations.
f) Dress properly. Do not wear loose
clothing or jewellery. Keep your hair,
clothing and gloves away from moving
parts. Loose clothes, jewellery or long
hair can be caught in moving parts.
g) If dust collection devices are used,
ensure that they are properly connected
and properly used. Use of dust collection
can reduce dust related hazards.
Flange spanner 1pc
Disc protect guard 1pc
Side handle
1pc
Carbon brush 1pair
Instruction manual 1pc