KNOP KNOPtool USB901, Руководство пользователя

Страница: 10 / 19

USB901/KNOPtool V1.1
©
KNOP Elektronik A/S
Fabriksvej 20

DK-7600 Struer

knop@knop.dk

www.knop.dk

+45 9784044 10
Mode: RX RX Measures signal strength of position transmitter. Measurements
must be taken around the entire doorway.
It may be important, depending on the situation, that the USB901 is held
vertically to measure the highest level. Optionally use a short USB
extension cable with a laptop (not included).
Normally, if more than 1.50 db/µV is measured, the level is acceptable.
Help: About Shows software and firmware versions of KNOPtool and
USB901.
[2] RX window Shows received telegrams from product shortly.
[3] System Selected when updating in a master repeater system.