background image

 

12 

 

TROUBLESHOOTING 
 

No Q450rs Power 

1.

 

Observe LED on Q450rs is on. 

2.

 

Check to see if Q450rs is plugged in. 

3.

 

Test AC outlet with a lamp to see if it is active. 

 

Q450rs led on but no sound 

1.

 

Ensure the source input is connected to the 
input selected and the source is playing. 

2.

 

If a BIX or BIB balanced input plate is being 
used, inspect and if necessary test the cat5 
cable with a cat5 tester. 

3.

 

If the cable tests correctly try connecting the 
source directly to the corresponding Stereo 
source input on the Q450rs. If it works then 
something is wrong with the BIX/BIB plate or its 
wiring. 

4.

 

Make sure the controlling devise is properly 
installed with the correct app and hardware. 

 

Sound is distorted 

1.

 

Try turning down the sound source volume 
(example: iPod) and turning up the Q450rs 
volume. 

2.

 

Turn down zone volume. 

3.

 

Check the speaker impedance with a multi-
meter to make sure it is not short circuited or 
partially short circuited.  

4.

 

Check speakers for damage or for loose 
material in cavity. 

 

 

 

 

 

 

 

 

 

 

 

 

LIMITED WARRANTY 

Knoll Systems (“Knoll”) warrants that each Q450rs (“the Product”) sold 
hereunder will conform to and function in accordance with the written 
specifications of Knoll. Said limited warranty shall apply only to the first 
person or entity that purchases the Product for personal or business use 
and not for the purpose of distribution or resale. Said warranty shall 
continue for a period of three years from the date of such purchase.  
Accessories such as remote control, keypads and balanced input plates 
when sold with or without Knoll amplifiers or controller amplifiers have a 
warranty that shall continue for a period of one year from the date of such 
purchase. Knoll does not warrant that the Product will meet the specific 
requirements of the first person or entity that purchases the Product for 
personal or business use. Knoll’s liability for the breach of the foregoing 
limited warranty is limited to the repair or replacement of the Product or 
refund of the purchase price of the Product, at Knoll’s sole option. 
Replacement Product may be re-furbished in “like-new” condition, at 
Knoll’s sole discretion. To exercise the Purchaser’s rights under the 
foregoing warranty, the Product must be returned at the Purchaser’s sole 
cost and expense, to Knoll or to any authorized Knoll service center 
provided, and the Product must be accompanied by a written letter 
explaining the problem and which includes (i) proof of date of purchase; (ii) 
the dealer’s name; and (iii) the model and serial number of the Product. 
When sending your unit in for repair, please ship your unit in its original 
packing material or a Knoll approved ATA Shipping Case, or have a 
professional packaging company pack the unit. Please insure your shipment 
for its full value. A return authorization number, issued by the Knoll 
customer service department, must also be clearly displayed on the outside 
of the shipping carton containing the Product. 

Note:

 Remanufactured Products are exempt from the foregoing Limited 

Warranty. Please refer to the Remanufactured Product Warranty for 
applicable warranty information. 

WARRANTY LIMITATION AND EXCLUSION 

Knoll shall have no further 

obligation under the foregoing limited warranty if the Product has been 
damaged due to abuse, misuse, neglect, accident, unusual physical or 
electrical stress, unauthorized modifications, tampering, alterations, or 
service other than by Knoll or its authorized agents, causes other than from 
ordinary use or failure to properly use the Product in the application for 
which said Product is intended.

 

DISCLAIMER OF UNSTATED WARRANTIES 

THE WARRANTY PRINTED ABOVE 

IS THE ONLY WARRANTY APPLICABLE TO THIS PURCHASE. ALL OTHER WAR-
RANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE 
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A 
PARTICULAR PURPOSE ARE DISCLAIMED. THERE ARE NO WARRANTIES THAT 
EXTEND BEYOND THE FACE HEREOF AND THE FOREGOING WARRANTY 
SHALL NOT BE EXTENDED, ALTERED OR VARIED EXCEPT BY WRITTEN 
INSTRUMENT SIGNED BY KNOLL. SOME STATES DO NOT ALLOW 
LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY MAY LAST, SO SUCH 
LIMITATIONS MAY NOT APPLY TO YOU. 

LIMITATION OF LIABILITY 

IT IS UNDERSTOOD AND AGREED THAT KNOLL’S 

LIABILITY WHETHER IN CONTRACT, IN TORT, UNDER ANY WARRANTY, IN 
NEGLIGENCE OR OTHERWISE SHALL NOT EXCEED THE RETURN OF THE 
AMOUNT OF THE PURCHASE PRICE PAID BY PURCHASER AND UNDER NO 
CIRCUMSTANCES SHALL KNOLL BE LIABLE FOR SPECIAL, INDIRECT, 
INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOST PROFITS, LOST 
REVENUES OR LOST SAVINGS. THE PRICE STATED FOR THE PRODUCT IS A 
CONSIDERATION IN LIMITING KNOLL’S LIABILITY. NO ACTION, REGARDLESS 
OF FORM, ARISING OUT OF THE AGREEMENT TO PURCHASE THE PRODUCT 
MAY BE BROUGHT BY PURCHASER MORE THAN ONE YEAR AFTER THE 
CAUSE OF ACTION HAS ACCRUED. SOME STATES DO NOT ALLOW THE 
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES 
SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. THIS 
LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY 
ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE-TO-STATE.

                                             

   

Содержание Q450rs













Отзывы: