Warranty
Knoll Systems warrants Illusion Amplifiers sold in the USA and Canada by
authorized Knoll dealers to be free of defects in materials and workmanship.
This warranty extends for three full years from the date of purchase by the
original consumer. Any products returned to Knoll Systems and found to be
defective by Knoll Systems within the warranty period will be repaired or
replaced at Knoll Systems option, at no charge. Knoll Systems will not be
responsible for the actual cost of installation or removal of the product, nor for
any incidental or consequential damages. Some states do not allow the
exclusion or limitation of incidental or consequential damages, so the above
limitation may not apply to you. This warranty gives you specific legal rights.
You may have additional legal rights that vary from state-to-state.
Specifications:
Inputs
Gold RCA jacks with adjustable gain
Input impedance
55k ohms
Outputs
Detachable 2 position connector
Output power
15 watts RMS (8 ohms)
Peak output power
20 watts (8 ohms)
Ideal impedance
4 - 8 ohms
Frequency response
10 Hz - 40 kHz +/- 1dB (1w)
THD distortion
less than 1% 20 Hz to 20 kHz
IMD distortion
less than 0.5% 60 Hz 7 kHz 4:1 (SMPTE)
Dimensions
4-1/2” x 1-3/4” x 4-1/4” (114 x 43 x 107mm)
Weight
¾ lb. (0.35 kg) without power supply
Power Supply
15VDC (included)
Knoll Systems
145 Tyee Drive Point Roberts, WA 98281
15-7163 Vantage Way, Delta BC V4G 1N1
Tel: (604) 940 1689
Made in Canada
Illusion Mono
Amplifier
Installation Instructions v1.1
Warning
: To be installed and/or used in accordance with appropriate
electrical codes and regulations.
Description:
The Illusion mono amplifier is a 15-watt RMS high-
fidelity amplifier. Stable from 2 to 16 ohm loads, the Illusion M
amplifier is very easy to use with just a power switch and a volume
control. Illusion amplifiers designed to meet the amplifier needs of
custom installed systems where high-quality sound is a specific
requirement. It can be powered directly by a 12-15 volt DC source or
with the included AC power adaptor. It can be easily made into a 70
volt amplifier by adding a 70 volt transformer.
Small size, big sound. Fits almost anywhere.
Amplifier has 15 watt RMS rating.
Each channel is protected from overheating,
overloading, overvoltage and undervoltage. The
protection circuitry automatically restores the amplifier
channel as soon as its parameter returns to the safe
operating area.
2-16 ohms stable. Goes with almost any speaker.
Shipped with 100-240 VAC power adaptor.
