Knoll HDP2160, Инструкция по установке и эксплуатации

Страница: 13 / 64

—
4
—
Rear view
I
TEM
L
ABEL
D
ESCRIPTION
S
EE PAGE
1.
AC IN Connect the POWER cable
10
2.
3D SYNC
Connect the 3D IR glasses transmitter
(Note: For Vivitek brand 3D IR glasses only)
3.
HDMI 2 Connect the HDMI cable from a HDMI device
4.
HDMI 1 Connect the HDMI cable from a HDMI device
5.
(USB)
Connect the USB cable from a computer
6.
VGA IN Connect the RGB cable from a computer
7.
RS-232C Connect RS-232 serial port cable for remote control
8.
COMPONENT Connect the Component cable from a component device
9.
USB POWER For USB charge support DC 5V
10. Kensington Lock
Secure to permanent object with a Kensington® Lock
system
38
11.
VIDEO IN Connect the COMPOSITE cable from a video device
12.
AUDIO IN (L and R) Connect the AUDIO cable from a audio device
13.
DC 12V TRIGGER
When connected to the screen through a commercially available cable,
the screen deploys automatically on start up of the projector. The screen
retracts when the projector is powered off (see notes below).
Note:
To use this feature, you must plug in the connector before turn on/off the projector.
Screen controllers are supplied and supported by screen manufacturers.
Do not use this jack for anything other than intended use.
Warning:
As a safety precaution, disconnect all power to the projector and connecting devices before making
connections.
1 2
10 3 4 5 6 7 8
9
11
12 13